End of Day Processing Configuration
  • 13 Dec 2022
  • 2 Minutes To Read
  • Dark
  • PDF

End of Day Processing Configuration

  • Dark
  • PDF

Early Access Feature
If you would like to request early access to this feature, please get in touch with your Mambu Customer Success Manager to discuss your requirements. For more information, see Mambu Release Cycle - Feature Release Status.

End of Day (EOD) processing refers to the daily and hourly jobs that are executed usually at the end of each day in order to manage the data in your system properly. For more information about this topic, see End of Day Processing and Cron Jobs.

With Configuration as Code (CasC), you may batch configure your End of Day Processing configuration via the API using YAML. For general information on CasC, see Configuration as Code Overview.

API Operations

CasC for end of day processing supports two operations.

Action Endpoint Description
GET /configuration/endofdayprocessing.yaml Get current end of day processing configuration.
PUT /configuration/endofdayprocessing.yaml Write a new end of day processing configuration to Mambu.
Please Note

If you PUT a configuration to Mambu, any optional configuration settings not included in the new YAML configuration will be deleted. PATCH requests are not currently supported.


For general information on CasC requests such as authentication and required headers, see Configuration as Code Overview.

The following section shows sample requests using curl and basic authentication. For all examples, replace TENANT_NAME with your actual tenant name.

GET configuration

curl -X GET 'https://TENANT_NAME.mambu.com/api/configuration/endofdayprocessing.yaml' \
-H 'Accept: application/vnd.mambu.v2+yaml' \
-H 'Authorization: Basic {auth}' 

{auth} is the base-64-encoded value of username:password. For more information, see Authentication in our API reference.

Please be Aware

If your endOfDayProcessingMethod is set to MANUAL then the configuration you will retrieve will not have the accountingCutOffTime specified.

PUT configuration

curl -X PUT 'https://TENANT_NAME.mambu.com/api/configuration/endofdayprocessing.yaml' \
-H 'Accept: application/vnd.mambu.v2+yaml' \
-H 'Content-Type: application/yaml' \
-H 'Authorization: Basic {auth}'  \
--data-binary @endofdayprocessing.yaml

{auth} is the base-64-encoded value of username:password. For more information, see Authentication in our API reference.

@endofdayprocessing.yaml represents the absolute path of the file on your device.

(Use “--data-raw” if you want to specify the YAML body inline).

Configuration examples

endOfDayProcessingMethod: "AUTOMATIC"
accountingCutOffTime: "10:00:00"
Please be Aware

The Accounting Cut-Off feature is an Early Access feature. If this feature is not enabled you will only be able to specify the accounting cut-off time via the API and not in the UI. For more information, see Scheduling Accounting Cut-Off and EOD processing time.


Name Type Description Required
endOfDayProcessingMethod String The end of the day processing method. The options are AUTOMATIC or MANUAL.
accountingCutOffTime String The accounting cut-off time. The format is hh:mm:ss. Required if endOfDay
ProcessingMethodis AUTOMATIC, otherwise it is optional.


If you do not receive a 200 OK response then fix any validation errors and make another PUT request until you receive a 200 OK response.

Please Note

If you PUT a valid YAML configuration to the API and you do not receive a 200 OK status code within 60 seconds, you may receive a 504 Gateway Timeout status code. We expect all responses to be below 60 seconds.

If you encounter this issue, please contact us through Mambu Support so we can investigate it.

Was this article helpful?